Solution 2000/3000 - How to Add a 3rd Domestic Number

Adding an Extra Domestic Number - Your Guide to Solution 2000/3000

Domestic calls will only be made in the event of an emergency. It will not transmit Open/Close or Disarm/Arm reports to domestic users.

When we utilize [9][6][5] to do domestic default, the system changes the Zone Status Report / Arm. Disarm Report / System Status Report to "2 = Report to Receiver 2."

On previous firmware versions (before 2.0) Bosch Solution 2000 or Bosch Solution 3000 could only handle up to two domestic numbers. There was no problem setting the report routes to receiver 2 because there was no Receiver 2 in the system. However, with the most recent firmware version 2.0, the system supports up to 8 domestic numbers, which may pose a difficulty if a third domestic number is added.

Please clarify how many domestic numbers you intend to put into your alarm system; if more than two, manually change the Transmission Format of Receiver 2, 3, or 4 to 4 = Domestic. You must also manually set the following reporting routes to 0 = No reports allowed.

This way, the domestic reporting is properly configured.

This guide is for Bosch Solution 2000 and Bosch Solution 3000