FIBARO Smart Implant allows to enhance the functionality of wired sensors and other devices by adding Z-Wave network communication.
You can connect binary sensors, analog sensors, DS18B20 temperature sensors or DHT22 humidity and temperature sensor to report their readings to the Z-Wave controller.
It can also control devices by opening/closing output contacts independently of the inputs.
| Power supply | 9-30V DC ±10% | 
| Inputs | 2 0-10V or digital inputs 1 serial 1-wire input  | 
| Outputs | 2 potential-free outputs | 
| Supported digital sensors | 6 DS18B20 or 1 DHT22 | 
| Maximum current on outputs | 150mA | 
| Maximum voltage on outputs | 30V DC / 20V AC ±5% | 
| Built-in temperature sensor measurement range | -55°C–126°C (-67°F–259°F)  | 
| Operating temperature | 0–40°C (32–104°F) | 
| Radio protocol | Z-Wave (500 series chip) | 
| Radio frequency | 868.4 or 869.8 MHz EU; 908.4, 908.42 or 916.0 MHz US; 921.4 or 919.8 MHz ANZ; 869.0 MHz RU;  | 
| Radio ransmit power | max. 7 dBm (EIRP) | 
| Range | up to 50m (164 ft) outdoors up to 40m (131 ft) indoors (depending on terrain and building structure)  | 
| Dimensions (Length x Width x Height)  | 
29 x 18 x 13 mm (1.14” x 0.71” x 0.51”)  | 
| Compliance with EU directives | RoHS 2011/65/EU RED 2014/53/EU  |