Home Center 3 Lite is a smaller version of the most advanced smart home management unit in the world. The device has been designed based on the solutions used in the Home Center 3 platform. This central unit can be connected with other Z-Wave devices which you can use while controlling electronics and household appliances, lighting, blinds, HVAC, alarm or watering system - with just a single button, gesture or word. Home Center 3 Lite is recommended for flats and smaller smart home installations.
Features:
Provides a reliable foundation for FIBARO System,
Capable of controlling all FIBARO and other compatible devices using the following radio standards:
Nice FLOR, OPERA i PLN2+,
Elero PLN2
Z-Wave (700 series),
Wi-Fi – 2.4 GHz (802.11 b/g/n).
Allows to add up to:
40 Nice devices (recommended),
40 Z-Wave devices (recommended),
1 IP camera,
20 scenes,
10 Quick Apps,
5 plugins.
No Internet cable required, works on Wi-Fi,
Modern interface designed for ease of use,
Enhanced and convenient scene editor,
Support for more advanced apps and drivers,
May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.
Specifications:
General information
Model
HC3L-001
Power supply
5V DC , max. 1A (adapter included)
Operating temperature
0-40°C
Operating humidity
max. 75% relative humidity (non-condensing)
Power connector
USB Micro B
Dimensions
178x110x31 mm
Radio Communication
Protocol
Radio frequency band
Max. transmitting power
Z-Wave (700 series)
868.0-868.6 MHz 869.7-870.0MHz
+9dBm
Wi-Fi (802.11 b/g/n)
2400-2483MHz
+20dBm
Status indicator
Pulsing blue – start-up
Red – Wi-Fi in Access Point mode (ready to configure)
Pulsing copper – disconnected from the Internet
Green – connected to the Internet
Pulsing red – start-up to Recovery mode
Buttons
R – Reboot
Restart: hold R button for 5s
D – Recovery
Put the gateway in Recovery mode: hold D button during start-up
Switch between Dynamic and Static IP: hold D button for 10s, then click when diode is blinking:
yellow blinking: IP will switch to Dynamic
green blinking: IP will switch to Static
Reset network settings: hold D button for 20s, then click when diode is blinking red
Be the first one to review this product.
Your review is submitted for approval.
Subscribe to Our Newsletter
Subscribe to our newsletter & get notification about discounts.
Subscribe to Our Newsletter
Subscribe to our newsletter & get notification about discounts.
By subscribing to our newsletter you agree to our Privacy Policy.
The website uses cookies to ensure you get the best experience on our website.
Rudy from Australia purchased Bosch1 hour ago
Completed by Alarm Expert
