Fibaro - FGR-223 Roller Shutter 3
- * Please contact us about stock information
- FGR-223
- BRANDS, SECURITY & AUTOMATION
- Click Here
Overview
THE Z-WAVE+ FGR-223 MICROMODULE FROM FIBARO - FOR CONTROLLING SHUTTERS REMOTELY
Shutters protect your privacy but they can do so much more by enabling significant energy savings to be made. They can be used in winter to keep heat in, and in summer to screen out the sun's rays and keep your home as cool as possible.
The new FGR-223 micromodule controls shutter, venetian blind and even garage door engines. Thanks to the wireless Z-Wave+ protocol, it turns a standard installation into an intelligent one.
The module is placed behind an existing switch. The motor can be controlled both locally with the switch, and remotely using a Z-Wave emitter or a domotic box.
The micromodule is also capable of transmitting the instantaneous (W) and cumulative (KWh) electrical consumption of the item that it is connected to.
It has larger terminals that can be connected to two 1.5mm² cables. Its rounded form means that it meets the safety standards of the most exacting countries.
Each Z-Wave module functions with the other modules as a wireless repeater, to provide complete coverage across your home.
Note: This module requires neutral wiring to work.
Features:
- Control your roller shutters remotely
- Compatible with any Z-Wave or Z-Wave+ Controller
- Advanced microprocessor control
- Compatible with BSO and venitian blinds with positioning of the slats
- Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption
- Works with various types of switches – momentary, toggle and dedicated roller blind switches
- Installation behind an existing switch
- Up/down function and positioning
- Compatible with mechanical or electronical stop motors
- Larger terminals to make wiring easier
- Rounded shape that meets the strictest standards
- Instantaneous and cumulative energy meter
- Fibaro Home Center 2 box wireless update
- Z-Wave network coverage test function
- Small, discreet and aesthetically pleasing
- Easy to use and install
Note:
- This device may be used with all devices certified with
the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers. - The device is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.
Specification:
| Power supply: | 100-240V~ 50/60 Hz |
| Rated load current: | 4.2A for lamps and resistive loads 1.7A for motors with compensated power factor (inductive loads) |
| Supported motor type: | single-phase AC motors |
| Required limit switches: | electronic and mechanic |
| Power consumption: | up to 0.8W |
| Operating temperature: | 0-35°C |
| Active element: | micro-gap relay switch μ |
| For installation in boxes: | Ø ≥ 50mm, depth ≥ 60mm |
| Radio protocol: | Z-Wave (500 series chip) |
| Radio signal power: | EIRP up to 6dBm |
| Radio frequency: | 868.4 or 869.8 Mhz EU 908.4 or 916.0 Mhz US 921.4 or 919.8 Mhz ANZ 869.0 Mhz RU |
| Range: | up to 50 m outdoors up to 30 m indoors (depending on building materials) |
| Dimensions: (L x W x H): | 42.50 x 38.25 x 20.30 mm |
| Compliance with EU directives: | RoHS 2011/65/EU RED 2014/53/EU |
Rudy from Australia purchased
Bosch
1 hour ago
Completed by Alarm Expert