Bosch Solution 6000 Unlock Key - Single Use CM255B

Bosch Solution 6000 Unlock Key - Single Use CM255B

Overview:

Many series two Solution control panels include a software option that, when selected, will turn off the factory defaulting option.
If this has been set, then you must know the current installer code to access programming mode or to default the panel.

To determine if the panel has been factory default disabled, remove all power from the panel and then re-apply the power. If the onboard relay pulses or clicks five times, then defaulting has been turned off.

In the field, many situations arise where it is not possible to determine the current installer code. Until now, the only remedy for this was to remove the control panel and return it to the distributor for factory defaulting. Panel removal, transportation costs, installer labour, and the possibility of damage during transit make this a costly exercise.

The CM255B factory default module has been designed to eliminate the need to un-wire the control panel or spend the time and money returning it to the factory for defaulting. 

Important:

• The CM255B is a one-time-only use device. discard after use.
• All current control panel programming may be lost if you proceed
• There is no warranty provided with this product because of its disposable nature. Once used, the module should be discarded
• Even if the original installer is locked out, this method works.

Compatibility:

The CM255B is compatible with the following Solution control panels: