FIND A CHEAPER PRICE WE WILL BEAT IT BY 1% TO 5%
CALL US ON 1300 843 883
Takex Pxb Series Intelligent Quad Beam Anti Crawl PXB-100ATC-KH
In stock
Canberra: Out of Stock
|
Sydney: Out of Stock
|
Brisbane: Out of Stock
|
Melbourne: Out of Stock
|
Perth: Low Stock
Independent control of upper and lower beams
Exc. GST
$1,997.58
Inc. GST
$2,197.34
Eligible Coupon
- PXB-100ATC-KH
- ALARM, BRANDS
- Click Here
Overview
Features:
- Independent control of upper and lower beams
- Specifically designed for use in TA series Tower Enclosures
- Double coated electronics for demanding environments
- Choose between synchro-quad and anti-crawl operation
- Dual outputs for crawl attempt and full beam break
- Sync-wire allows unlimited stacking without crosstalk
- 4 x Selectable beam channels
- Increased beam separation minimizes nuisance alarms
- Vivid internal colour aids beam alignment procedure
- Lightning and surge protection up to 15kV
Specifications:
| Type |
Anti-crawl
|
| Detection system |
Near infrared pulsed beam interruption system
(Anti-crawling, Anti-corrosion) |
| Infrared beam |
Double modulation pulsed beam by LED
|
| Detection distance |
Outdoor 330' (100m) or less
|
| Response time |
AT output : 0.05sec by upper/lower level simultaneous interruption
0.1/0.2/0.3/0.5sec by either level interruption HF output : 0.05sec by upper/lower level simultaneous interruption |
| Frequency Selection |
4 Channels (+ Sync wire)
|
| Supply voltage |
12 to 30V DC (Non-polarity)
|
| Current consumption |
Transmitter : 27mA
Receiver : 48mA |
| Alarm output |
Dry contact relay output N.O./N.C. selectable
Contact action : Interruption time (Min.2sec.) Contact capacity : 30V (AC/DC) 0.25A (resistive load) Protective resistor |
| Environmental output |
Dry contact relay output N.O./N.C. selectable
Action : Activated when weather condition gets worse (Min.5sec.) Contact capacity : 30V (AC/DC) 0.25A (resistive load) Protective resistor |
| LED indicator |
Red LED (Receiver) ON : when an alarm is initiated
Red LED (Receiver) ON : when beam is attenuated |
| Adjustment |
Horizontal: ±90°, Vertical: ±20°
|
| Functions |
Modulated beam frequency selection,Tone indicator, Environmental module, Beam power selection,Transmitting power adjustment, Programmed AGC, Auto-gain lock function, Monitor Jack, Tamper, Response time adjustment, Upper/lower beam switch, Wireless checker, LED light turn-off function
|
| Mounting position |
Inside TA series Towers
|
| Wiring |
Terminals
|
| Weight |
Transmitter : 12.6oz (360g)
Receiver : 15.8oz (450g) |
| ENVIRONMENTAL SPECIFICATION | |
|---|---|
| Ambient temperature |
-31°F to +151°F (-35°C to +66°C)
|
| IP Rating |
N/A
|
Subscribe to Our Newsletter
Subscribe to our newsletter & get notification about discounts.
Rudy from Australia purchased
Bosch
1 hour ago
Completed by Alarm Expert